PHYSICOCHEMICAL AND HEAVY METAL ANALYSIS OF POTABLE DRINKING WATER PRODUCED AND SOLD IN ILARO, YEWA SOUTH, OGUN STATE
C. U. Ukonu, O. F. Olowoyo & C. V. Abiaeziem, August 2022, Published: 2022-08-23
With the recent increase in the consumption of sachet and bottled water in major cities and towns in Nigeria, there
are several infections associated with food and water and there is a growing concern for the safety and quality of
drinking water. Assessment of physicochemical parameters and heavy metals were carried out in potable water of
Ilaro town. Ten samples from five popular sachet water factories were collected directly from the water factories
(two per industry). The samples were examined physically and chemically using AOAC standard methods and
instrumentation. The values of pH, electrical conductivity (EC), total dissolved solid (TDS) and alkalinity (HCO3)
are found to range from (6.14 – 6.82), (81.90 – 169.8), (36.86 – 74.01) and (12.50 – 60.55) respectively. The pH
concentrations in two of the samples were found to be lower than World Health Organization (WHO) standard of 6.5
in drinking water. Concentrations of heavy metals (Lead , Manganese, Nickel and cadmium) were determined using
atomic absorption spectrophotometer. Some of them were not detected by the instrument, while manganese was found
to be above the stipulated limits in some samples. It was concluded that though the value of the pH and manganese
concentration in some samples did not fall within the WHO limits, they do not pose any serious health risk to
consumers. Generally, the result obtained in this study indicated that the potable water produced and sold in Ilaro
were of good quality and hygienic for consumption.
Keywords: Water, Heavy metals, Physiochemical parameters, WHO


