COMPARATIVE EVALUATION OF THE GEOTECHNIC PROPERTIES OF ANTHILL AND LATERITE SOIL FOR CONSTRUCTION WORK
Adegbesan Ololade O., Ayegbusi Olufunke O. & Adetunji Lawal, August 2022, Published: 2022-08-23
Goal 9 of the SDGs, which emphasizes the development of quality, reliable, sustainable, and resilient infrastructure,
can be used by engineering professionals. One such endeavor is to rid the environment of anthill soils and use them
for engineering purposes. Lateritic soils have been discovered to be useful in engineering works, and replacing them
entirely or partially with anthill soil will be an exciting innovation in the pursuit of economically and resilient
infrastructure. The purpose of this paper is to evaluate the geotechnical properties of anthill and laterite soil for
construction purposes. Lateritic and anthill soil samples were collected and tested using Sieve Analysis Tests,
Atterberg Limit Tests, Compaction Tests, and the California Bearing Ratio Test. Laterite has a maximum dry density
of 27.5kN/m3 and a CBR value of 52.91 percent. This is greater than 30% minimum suitable for a road pavement
sub-base, whereas the anthills ranges fall within maximum dry density of 15.5kN/m3 and CBR value of 41.80%,
respectively. The investigation revealed that the higher the clay content, the lower the values of both the C.B.R and
M.D.D, indicating that anthill soil compared favorably with laterite and is suitable for various embankment
formation such as footpath, lawn tennis court, ramp, sub-base and base course in road construction work due to their
C.B.R values. Because of its clay content, anthill soil can also be used as a water retaining reservoir.
Keywords: Anthill, Geotechnical, Infrastructure, Lateritic, Sustainable


