DESIGN AND FABRICATION OF LOCALLY MADE PEELING AND SLICING MACHINE FOR PROCESSING BITTER YAM

Omotayo Alokun-Adesanya & Damilola Olatoye , August 2022, Published: 2022-08-28

A peeling and slicing machine was designed, fabricated and evaluated by using bitter yam as test material. It was fabricated with the objective of solving problems associated with peeling and slicing in order to revamp our indigenous foods for economic development and not contaminate them. This was done using locally sourced materials such as stainless steel, angle ion for main frame and drum. Yam peeling remains a challenge to design engineers involved in the design of yam processing machines. The design was powered by electricity with an electric motor. Bitter yam of three (3) different batch loads (1, 1.5 and 2kg) were used at residence times of 15, 30, 45 and 60s till the end of the operation. The results obtained were used to calculate the peeling efficiencies at 15, 30, 45 and 60s for 1, 1.5 and 2kg batch load were 2.80, 5.40, 33.63 and 67.00% respectively. The mean peeling capacities were 0.058, 0.050, 0.044 and 0.037kg/s respectively while the mean peel weight proportions were 0.66, 1.85, 6.0 and 13.4% respectively. The slicing efficiency for 1, 1.5 and 2kg batch loads range between 67.1-89.5% while slicing capacity ranged between 0.003-0.008kg/s at slicing time between the ranges of 120-186secs. It was concluded from the study that the machine was efficient in peeling and slicing bitter yam and can be done in large capacities to reduce product losses and processing time to boost agricultural technologies in food processing. Keywords: peeling, fabrication, slicing machine, drudge.
Back