Compressive Strength of Concrete using Ceramic Tiles in Partial Replacement of Cement and Coarse Aggregates

Adeniran Adeala, Oladapo Olaoye & Abdulwaheed Olorukooba , August 2022, Published: 2023-02-09

A significant unit of shattered ceramic tiles used on a construction site for finishes becomes waste and mostly abandoned though sometimes re-use in tiling of shop outlets. The purpose of this experiment is to re-use ceramic tiles in concrete as material to partially replace cement and coarse aggregates. Ceramic tiles were broken into coarse and ground into powdery forms to replace both coarse aggregates and cement respectively in proportions of 0 to 30% at interval of 5%. Concrete cubes with a water cement ratio (W/C) of 0.4 were cast for each replacement (0-30%) and cured for 7, 14, and 28 days, respectively. This study focused on compressive strength of both conventional and ceramic modified concrete and was carried out in accordance to British Standard.. At 28 days, the compressive strengths of the modified concrete (5-30%) were 22.38N/mm2 , 21.38N/mm2 , 23.69N/mm2 , 19.71N/mm2 , 17.51N/mm2 , and 14.82N/mm2 respectively, compared to control (25.77 N/mm2 ). It can be concluded that the combined cement and coarse aggregates can be substituted with ceramic tiles in powdery and coarse forms respectively up to 15 % in concrete with the resultant concrete possessing properties similar to conventional concrete. Keywords: Aggregate, Compressive Strength, Concrete, Ceramic tiles, Reuse
Back